Hundal Dental Traders

• Pack of 20 Capsules 0.25gm Each
• Shade – A1 , A2 , A3 , A3.5 , B1 , B2

The bulk fill flowable that’s both fast and strong, so you can save time and have confidence in posterior restorations.

Features

• Flow-on-demand handling
• Excellent as bulk fill base
• Excellent as a low-stress liner
• Up to 4 mm depth of cure
• Excellent handling and cavity adaptation

Packing

• 20 Capsules of 4gm
• Shade – A1,A2,A3,U

Filtek™ Bulk Fill Posterior Restorative is your one-step bulk placement solution designed to improve productivity by allowing fast and easy posterior restorations. There’s no question that bulk fill materials save time, however, true simplification involves eliminating complicated expensive dispensing devices, additional layers and multiple steps, without compromising wear resistance or stress relief.
Features

One-step placement, no additional capping layer.

Stress relief to enable up to 5mm depth of cure.

Excellent adaptation without additional expensive dispensing devices.

Excellent handling and sculptability.

TRUE nanofiller technology and two innovative methacrylate monomers act to lower polymerisation stress without compromising wear.

Fast and easy procedure.
No expensive dispensing device.
Better in vitro wear resistance than market-leading bulk fill material.

Packing

4gm syringe

Shade A1, A2, A3, B1,C2

• All direct, light-cured bonding procedures.
• Indirect bonding procedures when combined with 3M ESPE RelyX ARC Adhesive Resin Cement.
• Root surface desensitization.
• Porcelain and composite repair.
• Bonding veneers in combination with RelyX Veneer Cement from 3M ESPE.

• Excellent bonding to dentin and enamel.
• Doesn’t need shaking; nanofiller is stable and will not settle.
• Convenient bottle design allows easy opening and dispensing.
• Use for direct and indirect restoration.

GC everX Posterior is a fibre-reinforced composite designed to be used as dentine replacement, in conjunction with conventional a composite such as G-ænial Posterior used as enamel replacement. The short fibres of GC everX Posterior will make it a perfect sub-structure to reinforce any composite restoration in large size cavities. Fibres will also prevent and stop crack propagation through the filling, which is considered to be the main cause of composite failures. Thanks to its unique properties, GC everX Posterior opens new possibilities for restorations of extensive cavities at chairside and is the answer to the growing demand for an economic restorative alternative for big size cavities.

Indications
Reinforcing material for direct composite restorations, especially in large posterior cavities, including:

• Cavities with 3 surfaces or more to be restored
• Cavities with missing cusps
• Deep cavities (including class I, II and endodontically treated teeth)
• Cavities after amalgam replacement (especially since amalgam placement often lead to initiation of crack and cusp fracture)
• Cavities where onlays & inlays would also be indicated

Features

• Short fibres prevent and stop the progression of fracture in the restoration
• Fracture toughness equivalent to dentine and almost double to any composite will bring unsurpassed strength to the restoration
• Minimal horizontal shrinkage as fibres contribute to shrinkage reduction in the direction of their orientation
• 4 to 5 mm increments can be cured simultaneously
• Reliable bond to overlaying composite as well as to the tooth substance

Packing
Universal shade(transparent)
15 x 0.13 ml (0,25 g) unitips

• Easy to model, non-sticky consistency.
• Insensitive to surgical lighting.
• Quickly and easily polished.
• Natural fluorescence.
• Reduces shrinkage due to pre-polymerised particles.
• Simplicity in choice of colour.

• Brilliant NG 3 x 4gm syringe
• One Coat 7.0 - 5ml (7th Gen Bond)
• Shade guide Accessories

• Applied in composites, amalgams, metals, ceramics and dental enamel
• Useful at the clinic and laboratory
• Excellent natural brightness
• Hydrosouble, for an easy cleaning

• Acts simultaneously on both, lingual and vestibular side, providing a perfect adjustment of the matrix to the tooth
• Promote a separation without harming the gingiva, more comfort to the patient
• Easiness reconstruction of the contact points
• Easy and quick system for the dentist
• Available in 3 sizes codified by colors, to be chosen according to the cervical-occlusal height of the proximal box:
• 1) Green – 2,0 mm: Indicated for deep cavities
• 2) Yellow – 2,6 mm: Indicated for medium cavities
• 3) Blue – 3,2 mm: Indicated for conservative cavities

• 1 x 1g Syringe
• 5 x disposable tips
• Shades: A1,A2,A3,A3.5,B1

• Exposes pulpcapping and pulpotomy
• Temporary filling material to root canal
• Treatment of external resporation
• Forms secondary dentine

• The first non-heated flow-gutta percha that does not shrink.
• Allows great ease of handling as only one master point is needed (no condensation required)
• Has excellent flow properties which allow optimum distribution in the canal.
• Extremely bio-compatible.
• Can be removed easily during re-treatment.
• Ensures a very tight seal of the root canal.
• Allows immediate post preparation.
• Setting time 25-30 minutes.
• Store in a cool environment away from direct heat and sunlight.
• Setting time 25-30minutes.
• Working Time 10-15 minutes.
• Radiopaque for excellent x-ray evaluation.
• Working time 10-15 minutes.

• 1 Dualibarrel Syringe,12 Mixing Tips,1Mixing Pad
• 24 Mixing Tips
• 1 Dual-barrel syringe 

• Unlimited availability and consistent quality.
• Measure the defect and trim the matrix to the desired size and thickness.
• Once moist, the matrix can be further trimmed to the desired size and thickness.
• Geistlich Fibro-Gide can easily be sutured.
• No need for pre-treatment: Excellent hydrophilic characteristics lead to rapid hydration by patient’s own blood and/or sterile saline solution with a volume increase of approx. 3-12 %.
• The soaked matrix adapts to contours and adheres well to the defect.
• Squeezing and re-hydration: Once squeezed, the matrix goes back to its initial state after remoistening (considering the additional swelling of approx. 25 %).
• Geistlich Fibro-Gide does not require a second surgical site.
• Geistlich Fibro-Gide should be used as a submerged graft to increase soft-tissue thickness around implants and natural teeth.
• Geistlich Fibro-Gide is a porcine, porous, resorbable and volume-stable collagen matrix, specifically designed for soft-tissue regeneration.The collagen matrix is made of reconstituted collagen and undergoes smart chemically cross-linking to improve its volume stability while maintaining good biocompatibility.
• The matrix is available in two sizes:

• 15 x 20 x 6 mm
• 20 x 40 x 6 mm

• Easy to model, non-sticky consistency
• Insensitive to surgical lighting
• Quickly and easily polished
• Natural fluorescence
• Reduces shrinkage due to pre-polymerised particles
• Simplicity in choice of colour

• Its creamy consistency allows easy and fast modelling.
• Excellent finishing and polishing properties facilitate a high surface lustre.
• The easy shade range permits a convenient shade selection and matching.
• Its radiopacity enables a safe and reliable diagnosis.
• Versatile all-rounder for many indications.
• Easy and fast handling due to its low viscosity and good thixotropy.
• Its radiopacity enables a save and reliable diagnosis.
• Pronounced colour adaption.

• Fusion Flo is an excellent flowable composite that delivers high strength wear resistance.
• It is characterized by optimum surface affinity, penetrates into most difficult area.
• It combines esthetics as well as flow on demand.

• Filling of smaller cavities
• Extended fissure sealing
• Restoration class III to V
• Repairs of filling veneer

• Optimal flowability
• Higher filler loading of 70% w/w
• Excellent physical properties
• Lower polymerization shrinkage
• Very good abrasion resistance

• Intro Pack: 2 X 2g syringes, 2g, 10 X Applicator Tips
• Combo Kit: 4 X Syringes , 2g, (A2,A3,B2,B3), 20 X Applicator Tips

• Protects glass ionomer fillings from drying during the first hour after placement
• Increase the wear resistance of restoration
• Glossy surface for composite resins

• Greatly enhances the esthetics of restorations
• Provides improved stain resistance
• Superior bond durability for long-lasting gloss

• Direct posterior restorations (including the occlusal surface)
• Repair of porcelain/composite

• Ideal handling
• Prominent physical strength
• Exclusive posterior shade availability
• Quick curing time

• 1 Syringe (4.2g)
• Shades:- PA1,PA2,PA3

• Geistlich Bio-Gide Perio 16x22mm with sterile templates
• Geistlich Bio-Oss  Collagen 100mg

• Reinforced Rings:
• Hard (blue): Indicated for cases requiring more pressure and dental separation
• Soft (pink): Indicated for cases requiring less pressure and dental separation
• Both have a greater resistance to deformation, extending its lifetime
• Its angles allows a perfect adaptation to the occlusal-cervical height, no influencing of the adjacent tooth
• Triangular Silicone Tips
• More anatomical, providing a better adaptation

• Indicated for Class II procedures with composites, glass ionomer and amalgams
• Its incorporated fixing system allows the regulation of the matrix according to the tooth size, fixing it firmly and dispensing the use of a matrix holder.
• Excellent adaptation that provides the reestablishment of contact points due to the polyester thickness of 0,075mm
• Reduced time of preparation, providing better quality for the restoration and more comfort to the patient
• Due its transparency, resins can be cured through the matrix
• Available for molars, molar deciduous and premolars.

• Two instruments with in a kit composed by five different sizes and flexible shell shapes (XL|L|M|S|XS)
• Simple, comfortable and safety application
• Easily adapted to all class V restorations
• Allows lighting cure composites through the matrix while it is holded under pressure
• Obtains an excellent tooth anatomy reducing the chair time
• Eliminates the oxygen inhibition layer, providing a smooth surface that will require less adjustments
• Does not adhere to the composites
• Autoclavable

• Dia Absorbent Paper Points are color-coded and spill proof
• Hand rolled for extra absorbency
• Rigid enough to insert in canals without curling or bending
• Rolled firmly to hold shape when withdrawn from the canal
• Highly absorbent
• Sterilized individual packages
• Variety sizes available

• Precise impressions with improved readability thanks to superior polyether features and bright material colour
• Increased cooperation efficiency between practice and lab
• More patient comfort through fresh taste and easy removal from the mouth (“Soft” version)
• Precisely fitting restorations
• Saves time and money with reliable results on the first take
• Less retakes, adjustments and reworks required

• Implant impressions
• Edentulous impressions
• Crown and bridge impressions
• Inlay and onlay impressions