Hundal Dental Traders

• Silica - 41.9%
• Alumina - 28.6 %
• Almunium flouride - 1.6%
• Calcium flouride - 15.7%
• Sodium flouride - 9.3%
• Almunium Phosphate - 3.8 %

• Polyacrylic acid - 35%
• Tartaric Acid - 5-15 %
• Water

• High flexural strength, reduces the risk of restoration fracture.
• Long-term fluoride release.
• Adhesion to enamel and dentin.
• Low acid erosion.
• Cost-effective.
• Radiopaque.

• Quick and easy to use with children.
• Excellent mechanical properties for posterior teeth.
• Bulk-fill convenience.
• Ketac Molar Quick - for fast setting posterior restorations.

• Delivery system - Hand-mixed.
• Product type - Cement
• Compressive Strenght - High upto 200Mpa.
• Mateial - Radio-opaue .

• 1 x 15 gm Powder
• 1 x 7.8 ml Liquid
• 1 x Mixing Pad
• 1 x Plastic Scoop

• High compressive strength.
• Minimal abrasion.
• Excellent handling characteristics: plastic contouring and condensing properties similar to amalgam.
• Aplicap capsule provides consistent quality, simplified handling and a nozzle for direct application of the material.
• Available in four shades.                                                                  

• Single surface fillings in non-occlusal areas.
• Cervical fillings in posterior region.
• Base material for single and multiple-surface composite fillings.
• Core build-ups prior to crown placement.
• Primary teeth Filling.

Indication :

Fusion I-Seal is a light glass ionomer cement for lining, extended fissure sealing and smaller lesions.

Benefits :

• Ready to use component light cured glass ionomer cement.
• High compressive strength.
• Fluoride release.
• Radiopaque.
• Fast and easy to apply

Economy Pack

• 4X2g Syringes +20xApplicator Tips

• Contains spherical silver-tin alloy particles in a specially formulated glass ionomer powder for better performance with exceptional handling and physical properties even under humid conditions.
• High compressive strength prevents cuspal flexure under large composite restorations
• Exhibits excellent adhesion to tooth structure, pins and amalgam.
• Silver powder is premixed for easy homogeneous mixing
• Packable and condensable like amalgam without mercury.
• Radiopaque, excellent fluoride release and recharge with high resistance to erosion.

• 1) Universal restorative that is indicated for direct cosmetic tooth modifications, restoration of Class III, IV, and V cavities, cervical erosion, root caries, Class I and selective Class II cavities, fractures, laminate veneers and core build-up.
• 2) Offers fluoride release and recharge similar to glass-ionomers with a unique anti-plaque effect specially useful when treating high caries risk patients.
• 3) Assures predictable aesthetics, excellent shade stability, improved polishability and outstanding surface luster due to the nano-hybrid filler distribution in the material.
• 4) Remarkable wear resistance, radiopacity 3 times that of natural dentin for accurate diagnosis, fluorescence similar to natural teeth and biocompatible.
• 5) Optimal physical properties to ensure durable and long lasting restorations under tough intraoral conditions.6) Enhanced handling with ideal thixotropic nature and easy to use ONE TOUCH CAP syringe system.

• DP (Dark Pink) 
• LP (Light Pink)
• OR(Orange) of 2.5gm Syringe 

• Excellent aesthetic with good translucency and high surface polish ideal for cosmetic touch up and surface modification of aesthetically demanding cases.
• Fluoride release and recharge is advantageous when using as a base in conjunction with Beautifil II and the unique anti plaque effect helps when treating patients with poor oral hygiene.
• Radiopaque with high elasticity and stable stress relaxation , syringe design , dispense on demand with no oozing of escess paste , 360 deg rotary finger grip and multi-purpose rubber shield cap.

Ketac Universal restorative saves time by eliminating the need for a coating-yet it delivers higher compressive strength and surface hardness than several competitive glass ionomers that require one.This advancement is the latest 3M ESPE Dental’s 30-year history of developing trusted glass ionomer. It available in 12.5gm .
Indication:

• Linings for single- and multi-surface composite fillings
• Core build-up prior to crown placement
• Primary tooth fillings
• Restricted stress-bearing Class I and Class II restorations
• Cervical Fillings
• Single- and multi-surface temporary fillings
• Minimal intervention(MI) filling therapy and A.R.T. (atraumatic restorative treatment) technique
• Fissure sealing

Benefits:

• No need for conditioner or coating
• Bulk fill- no need for layering
• Enables fast, one step, stress-bearing restorative solutions
• Extended indications for use compared to other glass ionomer materials
• Continuously releases flouride over 6 months
• Adapts easily to the cavity margin

Packing:-

• 12.5gm Powder
• 8.5ml Liquid
• Spoon
• Mixing Pad

All GC Gold Label Glass Ionomer contains strontium glass.&The strontium glass provides good radiopacity and snapset& characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium& in the formation of strontium hydroxyapatite and strontium& fluoroapatite to affect internal& remineralization within the& tooth structure.
Surface Strengthening Effect:
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer&surface achieving a surface strengthening effect. All GC& Gold Label Glass Ionomer strengthens over time in saliva.
A Consistent Predictable Seal:<
All GC Gold Label Glass Ionomer will display a glossy& surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The& subsequent movement of ions between dentin, enamel and& GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is& consistent, predictable and long lasting.

Indication

• Cementation of metal or porcelain fused to metal crowns, bridges, inlays
• Cementation of stainless steel crowns or orthodontic appliances retained with stainless steel crowns
• Cementation of orthodontic bands
• Base or liner

Advantages

• Allows minimal cavity preparation
• Less stress on margins and marginal seal
• Protects against secondary caries
• Promotes internal remineralization and surface strengthening
• Easy post-operative diagnosis
• Easier mixing and sharper setting makes it so easy to use
• Final finish may be completed under water 15 minutes from start of mix
• Matches to natural tooth structure
• Good colour match to tooth structure
• More durable, longer lasting restorations
• Assurance of successful restorations

Features

• Intrinsic chemical adhesion to both tooth structure and metal
• Glass Ionomer formulation
• Fluoride release
• High mechanical strength
• Excellent wetting properties
• Film thickness of just 15 microns
• Radiopaque
• Sharp set characteristics
• Low solubility
• Long term clinical data
• No surface preparation or bonding agent required
• Easy post-operative checks

• 1 x 35g Powder
• 1 x 25g Liquid

• Core build-up
• Restoration of primary teeth
• Cases where radiopacity is required
• As a base or liner.
• Class I, limited Class II, temporary fillings, etc.

• Strong direct bond - No undercuts, fewer pins; Will not chip or flake when trimmed or cut
• Simple technique - 4 minutes set to finish
• High fluoride release - Reduces secondary decay
• Will not stain or discolor surrounding teeth
• Easily distinguishable from the tooth structure
• Shrinks and expands like the tooth structure
• "No-mess" capsules or powder-liquid

• 1 x 15g Powder
• 1 x 17g Alloy
• 1 x 8ml Liquid

A high strength strontium-based glass ionomer restorative providing all the properties of genuine glass ionomers with physical properties strong enough for use in posterior teeth.

A Strontium-based Glass Ionomer:
All GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.

Surface Strengthening Effect:
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:
All GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.
Indication

Class I and small Class II restorations in non-load bearing areas

Class I and Class II restorations in deciduous teeth

Transitional restorations

Base / Core build-ups

Features

Chemical adhesion to tooth structure allows minimal cavity preparation without the need for etching or bonding agents

Chemical setting without shrinkage allows single step placement without layering

Similar thermal expansion as tooth structure produce minimal stress on the marginal seal

Strontium based glass provides good radiopacity and snap-set characteristics unanimously preferred by clinicians

Strontium based fluoride releasing formulation contributes to internal remineralization within tooth structure as well as increasing surface strength over time

High compressive and flexural strength, and 60% higher wear resistance than conventional glass ionomers makes Gold Label 9 strong enough for use in posterior teeth

Packing

1 x15 g Powder

1 x 8 g Liquid

• Wash material for the putty-wash impression technique
• Syringe material for the simultaneous mixing technique
• Impression material for relining

• Easy, quick, homogeneous mixing
• Ideal firmness for a tray material
• Excellent blend with wash material
• Oil-Free Texture- dry to the touch
• Time Saving (quick mix and fast set)

• 2 x 50 ml Cartridge
• 12 mixing tips

All GC Gold Label Glass Ionomer contains strontium glass.&The strontium glass provides good radiopacity and snapset& characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium& in the formation of strontium hydroxyapatite and strontium& fluoroapatite to affect internal& remineralization within the& tooth structure.
Surface Strengthening Effect:
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer&surface achieving a surface strengthening effect. All GC& Gold Label Glass Ionomer strengthens over time in saliva.
A Consistent Predictable Seal:<
All GC Gold Label Glass Ionomer will display a glossy& surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The& subsequent movement of ions between dentin, enamel and& GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is& consistent, predictable and long lasting.

Indication

• Cementation of metal or porcelain fused to metal crowns, bridges, inlays

• Cementation of stainless steel crowns or orthodontic appliances retained with stainless steel crowns
• Cementation of orthodontic bands

• Base or liner

Advantages

• Allows minimal cavity preparation
• Less stress on margins and marginal seal
• Protects against secondary caries
• Promotes internal remineralization and surface strengthening
• Easy post-operative diagnosis
• Easier mixing and sharper setting makes it so easy to use
• Final finish may be completed under water 15 minutes from start of mix
• Matches to natural tooth structure
• Good colour match to tooth structure
• More durable, longer lasting restorations
• Assurance of successful restorations

Features

• Intrinsic chemical adhesion to both tooth structure and metal
• Glass Ionomer formulation
• Fluoride release
• High mechanical strength
• Excellent wetting properties
• Film thickness of just 15 microns
• Radiopaque
• Sharp set characteristics
• Low solubility
• Long term clinical data
• No surface preparation or bonding agent required
• Easy post-operative checks

Packing

Gc Gold Label 1 Glass Ionomer Mini Pack

• 1 x 15g Powder
• 1 x 10g Liquid

A Strontium-based Glass Ionomer:
All GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.

Surface Strengthening Effect:
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:
All GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.
Indication

Restoration of Class III and V cavities

Erosion lesions

Primary teeth

Base / core build-ups

Features

Allows minimal cavity preparation

Less stress on margins and marginal seal

Protects against secondary caries

Promotes internal remineralization and surface strengthening

Easy post-operative diagnosis

Easier mixing and sharper setting makes it so easy to use

Final finish may be completed under water 15 minutes from start of mix

Matches to natural tooth structure

Good colour match to tooth structure

More durable, longer lasting restorations

Assurance of successful restorations

Packing
GC 2 Mini Kit

15gPowder

10g(8.0mL)Liquid

A Strontium-based Glass Ionomer:
All GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.

Surface Strengthening Effect:
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:
All GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.

Indication

• Restoration of Class III and V cavities
• Erosion lesions
• Primary teeth
• Base / core build-ups

• Allows minimal cavity preparation
• Less stress on margins and marginal seal
• Protects against secondary caries
• Promotes internal remineralization and surface strengthening
• Easy post-operative diagnosis
• Easier mixing and sharper setting makes it so easy to use
• Final finish may be completed under water 15 minutes from start of mix
• Matches to natural tooth structure
• Good colour match to tooth structure
• More durable, longer lasting restorations
• Assurance of successful restorations

• 1 x10g Powder
• 1 x 7g(5.6mL) Liquid

• 10gm Powder
• 6gm Liquid
• Mixing Pad

Hy-Bond GlasIonomer CX is an enhanced glass ionomer luting cement for permanent cementation designed to provide an excellent marginal seal and minimize postoperative sensitivity.
Features:-1) Excellent track record that offers a low film thickness of 18 microns, higher compressive strength , excellent bonding to tooth structure and low water solubility for long lasting restorations.2) Easy mixing , excellent handling characteristics and increased working time with a snap set reaction once placed in the mouth increases application efficiency.3) Offers Biocompatibility , Radiopacity and High fluoride release.
Packing:-
Hy-Bond GlasIonomer CX Mini PackPowdre 15gm & Liquid 8ml